Quadra-Fire QV32-A User Manual download pdf (Page 35)

Step 9. Finishing

Figure 38 shows the minimum vertical and corresponding

maximum horizontal dimensions of fireplace mantels or other

combustible projections above the top front edge of the

fireplace. See Figures 3 and 4 for other fireplace clearances.

Only non-combustible materials may be used to cover the

black fireplace front.

WARNING: WHEN FINISHING THE FIREPLACE,

NEVER OBSTRUCT OR MODIFY THE AIR IN-

LET/OUTLET GRILLES IN ANY MANNER.

Figure 38.

Minimum Vertical and Maximum Horizontal

Dimensions of Combustibles above Fireplace

CAUTION: IF JOINTS BETWEEN THE FINISHED WALLS

AND THE FIREPLACE SURROUND (TOP AND SIDES)

ARE SEALED, A 300°

F. MINIMUM SEALANT MATE-

RIAL MUST BE USED. THESE JOINTS ARE NOT RE-

QUIRED TO BE SEALED. ONLY NON-COMBUSTIBLE

MATERIAL (USING 300° F. MINIMUM ADHESIVE, IF

NEEDED) CAN BE APPLIED AS FACING TO THE FIRE-

PLACE SURROUND (SEE FIGURE 39).

Hearth Extensions

A hearth extension may be desirable for aesthetic reasons.

However, ANSI or CAN/CGA testing standards do not require

hearth extensions for gas fireplace appliances.

Figure 39. Sealant Material

2”

5”

6”

7”

8”

9”

12"

11"

10"

TOP FRONT EDGE

OF FIREPLACE

3”

11”

12”

10”

31”

CEILING

1”

TOP SEAL

JOINT

SIDE SEAL

JOINT

0”

1/4”

FINISH MATERIAL

MAY BE COMBUSTIBLE

- TOP AND SIDES

OF UNIT

Figure 40

Refractory Kit Placement (BRICK-291, BRICK-293)

CAUTION: REFRACTORY IS FRAGILE! CAREFULLY RE-

MOVE THE REFRACTORY FROM THE PACKAGING.

Remove the logs from the fireplace. Place the back wall

refractory centered against the back of the fireplace on the

grate assembly (see Figure 40).

When positioning the left wall use care in not knocking the

back wall down. Position the left wall all the way back against

the back wall. Using the retaining clip and screw included,

secure the side wall refractory as shown (see Figures 41

and 42).

Figure 41

Figure 42

Position upper back refractory by placing on left wall then

sliding in right wall (see Figure 43).

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 41 42

Comments to this Manuals

No comments

Quadra-Fire QV32-A User Manual Page 35

Comments to this Manuals

Related products and manuals for Unknown Quadra-Fire QV32-A