Quadra-Fire Quadra Fire 1900 Operations Instructions download pdf (Page 20)

Page

OPTIONAL FREESTANDING BLOWER INSTALLATION

INSTRUCTIONS FOR QUADRA-FIRE STOVES

Tools Required:

No.

Phillips screwdriver

318

socket and ratchet, or wrench

The blower is shipped fully assembled and ready for installation.

Step

Remove the blower cover by removing the six No.

Phillips head mounting screws.

Position the blower so the mounting clamp slides behind the outer skin centered at the rear of the stove

Tighten the three

114"

bolt

(318

hex head) to secure the blower to the outer skin.

Reinstall the blower cover and tighten the six Phillips head screws.

Plug the unit in and adjust the fan control as required.

OUTER SKIN

NO.

PHlLLlPS

HEAD

MACHINE

SCREWS

PLACES

FAN

SPEED

CONTROL

WlTH

COVER REMOVED. HOLD

THE

BLOWER

ASSEMBLY

THE

OUTER

SKIN CONTACTS

THE

MOUNTING BOLTS

WERE.

IM'HEX

HEAD

BOLTS

PLACES

Blower Switch Adjustments

The blower switch for this unit is adjusted at the factory and should not require further adjustment. When the blower switch

s turned clockwise it will clickon to high speed. Turn the switch more clockwise to decrease the speed. At full clockwise the fan

;hould blow very gently but should not stop.

Steps For Adjusting The Blower Speed Control

With the unit plugged in turn the speed control knob to slow. (Full clockwise)

With asmail screwdriveradjust the fan speed byturningtheadjustment mechanismthrough the holeon the side of the speed

control.

Adjust the speed so the fan runs slowly, but does not stop. Turn clockwise to slow the fan and counterclockwise to increase

the speed.

1 2 ... 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Quadra-Fire Quadra Fire 1900 Operations Instructions Page 20

Comments to this Manuals

Related products and manuals for Fireplaces Quadra-Fire Quadra Fire 1900